![]() ![]() You'll need a keyboard and mouse (a wireless one that uses the same dongle is ideal. HDMI cable, micro SD card (I used a 16gb, which is more than I need for this project. We will need a OTG usb cable, a HDMI adapter. * A Raspberry PI 3 should work with out any changes. You may want to make some changes to my setup, depending on what you change you may need to also make changes to the robot sketches, if you are planning on using the robot. * Also Note: these setup files are what I used to get the robot to work, the instructable will go over what is needed. * NOTES: At some point I may pull the branches together into the master branch, and may or may not remember to up this instructable. ![]() The project setup files can be found here (in the raspberrypi branch) (This isn't full prove, but works good enough for us). We will be setting up a MAC filter, so that only our robot and control systems will be able to connect to the AP. And it can be bridged to the internet (but that is beyond the project goal). The ideas presented here can be used for other web services (IE: web server, FTP server, gopher (yup showing my age here), irc, mail). Original for use with my D1 Mini WIFI Robot. We will be using a private MQTT broker with this project. Instead it will provide a private (intranet) network that can be used for robot control, and sensor processing. The access point or AP (for short) will not need access to the internet. ![]() The goal of this project is to create a wireless access point using a Raspberry PI Zero W. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |